MacBook Not Charging! How To Fix A MacBook That Won’t Charge

We have to ask… Is the MacBook definitely plugged in? Disconnect the charging cable from the laptop and plug it in again.

Check the plug socket too. Is the socket turned on? Try using a different wall socket. Plug something else into the socket to see it it works. We know all this sounds a bit basic, but double-check before you go any further.

Make sure your power adaptor is connected properly. Each Apple laptop adaptor comes in two parts, the square adaptor and its removable plug that connects to the wall, and the charge cable. Pull the two apart and put them back together.

What does your Apple adaptor look like? Is it in pristine condition or has it got any tears in the cable? Is the adaptor discolored in any way? Does it look burnt out? If so, try a different adaptor (I once took a MacBook Air to an Apple Store because it wasn’t charging. It turned out the fault was with the MagSafe charger which wasn’t functioning. Apple replaced the charger and all was well.)

Make sure you are using the correct power adapter and cable. For example, you may have a Mac that charges via USB-C, but not all USB-C cables are equal. Some cannot be used for charging. There are also various types of MagSafe cables that your Mac might require for charging – there are no less than three versions of MagSafe for Mac. You need to make sure you are using the correct one. See our guide to MagSafe. You should ideally use the charger that came with your Mac, including the included power brick. If you are using a low-wattage cable your Mac may not be able to draw sufficient power to charge.

Speaking of the power brick – is it overheating? If your power adapter is getting too hot it may not function. Make sure it isn’t covered by anything.

Also, check the power port on your Apple laptop for dust. This can prevent the connector from making a clean connection to the Mac and stop you from charging it up correctly.

If your Mac isn’t charging follow these steps:

1. Unplug the charging cable from your Mac.
2. Wait a few seconds.
3. Plug the cable back in.

As we explain in How to test a MacBook battery it’s actually quite simple to check your MacBook battery to see if it needs replacing.

To check is whether there is a problem with your battery follow these steps:

1. Click on the battery charge icon at the top right of the desktop near the clock.
2. Click on Battery Settings. This will open the battery section of System Settings (you can also get here from System Settings > Battery).
3. Check what the advice besides Battery Health.

In our case battery health is normal, but in an older Mac we saw a warning that we should Service Battery (as shown above).

On older Macs you should follow these steps to check battery health:

1. Hold down the Alt/Option key.
2. Click the battery charge icon at the top right of the desktop near the clock.
3. After the Condition heading at the top of the menu you’ll see one of four battery status messages: Normal, Replace Soon, Replace Now, and Service Battery.

If your battery is described as Normal you should have nothing to worry about in terms of battery health. If it suggests Replace Soon, Replace Now or Service Battery then that may well be the cause of your battery charging issues.

If your battery needs replacing you should read Should you replace your MacBook battery or pay Apple to do it?

Sometimes a software update may fix your Mac charging problems.

For example, when Apple issued the macOS Monterey 12.2 update a bug was introduced that caused some Mac batteries to drain really quickly in sleep mode. The issue was found to be related to an issue with Bluetooth and a subsequent macOS 12.2.1 update addressed the battery drain problem.

Make sure that your Mac is running the most recent version of the macOS software. Go to System Settings > General > Sofware Update (or System Preferences > Software Update in older versions of macOS) to check that there isn’t an update.

If you are still having no luck getting to the bottom of your Mac charging issues, you could reset the battery. The process you follow to reset the battery in your MacBook Pro or MacBook Air will be determined by the age of your Mac, and whether it has an Intel chip or an Apple chip inside.

It is unlikely that your Mac has a removable battery as that hasn’t been the case since before 2012. However, if your Mac is old enough to have a removable battery you could remove the battery, disconnect the power adapter, hold down the power key for 10 seconds before replacing the battery and then plug the power adapter back in. The battery will reset when you restart the Mac. If your Mac is that old it’s probable that this process isn’t going to help this aging battery recover though.

For Macs that don’t have a removable battery, the process to reset the battery requires you to reset the SMC (System Management Controller). This is a chip on your Mac’s logic board that controls the power. 

Resetting the SMC can help with battery and power-related problems, however, the process for resetting SMC is different depending on the age of your Mac. 

These are the steps you need to follow if your Mac has an Intel processor.

1. Shut down the MacBook.
2. Connect the power adapter.
3. Hold down Control + Shift+ Option/Alt and the Power button for about four seconds. Then release all four together.
4. Press the Power button to start up the Mac again.

If you have an Apple silicon Mac – with an M1, M2 or M3-series chip inside you won’t be able to reset the SMC because there is no system management controller–all functions that were previously handled by the chip are now embedded in the processor. This doesn’t mean you are stuck and can’t reset things: all you need to do is turn your Mac off, wait about 30 seconds, and turn it on again.

If you’d like to find out more, read out full tutorial on resetting the SMC. Also see: How to fix a Mac.

If the above advice doesn’t help then you should take your MacBook to Apple (or an Apple reseller that is an Apple Authorized Service Provider) for servicing and maybe consider having the battery replaced.

You’ll need to find out whether your Mac qualifies to be serviced by Apple. It depends on whether the Mac is still under warranty or if you have AppleCare. Here’s how to check if you are covered:

1. Click here to go to Apple’s Service and Support website. 
2. Enter your serial number (you can find it by clicking on the Apple menu > About This Mac).
3. Prove you aren’t a robot.

You will be taken to a page that explains what cover you have. In our case it indicates that Consumer Law May Apply and suggests we talk to an advisor.

If you have Apple Cover, or your Mac is still within warranty then it is easy to set up a repair. Just go through the options here. We suggest Startup or Power > Charging tips or troubleshooting. You’ll see options to Talk to Apple support, schedule a call, start a chat session, or bring in for repair. 

We have this article about getting a Mac repaired. We also look at Mac DIY repair guide and how long Apple repairs take and how much they cost.

We have to ask… Is the MacBook definitely plugged in? Disconnect the charging cable from the laptop and plug it in again.

Check the plug socket too. Is the socket turned on? Try using a different wall socket. Plug something else into the socket to see it it works. We know all this sounds a bit basic, but double-check before you go any further.

Make sure your power adaptor is connected properly. Each Apple laptop adaptor comes in two parts, the square adaptor and its removable plug that connects to the wall, and the charge cable. Pull the two apart and put them back together.

What does your Apple adaptor look like? Is it in pristine condition or has it got any tears in the cable? Is the adaptor discolored in any way? Does it look burnt out? If so, try a different adaptor (I once took a MacBook Air to an Apple Store because it wasn’t charging. It turned out the fault was with the MagSafe charger which wasn’t functioning. Apple replaced the charger and all was well.)

Make sure you are using the correct power adapter and cable. For example, you may have a Mac that charges via USB-C, but not all USB-C cables are equal. Some cannot be used for charging. There are also various types of MagSafe cables that your Mac might require for charging – there are no less than three versions of MagSafe for Mac. You need to make sure you are using the correct one. See our guide to MagSafe. You should ideally use the charger that came with your Mac, including the included power brick. If you are using a low-wattage cable your Mac may not be able to draw sufficient power to charge.

Speaking of the power brick – is it overheating? If your power adapter is getting too hot it may not function. Make sure it isn’t covered by anything.

Also, check the power port on your Apple laptop for dust. This can prevent the connector from making a clean connection to the Mac and stop you from charging it up correctly.

If your Mac isn’t charging follow these steps:

1. Unplug the charging cable from your Mac.
2. Wait a few seconds.
3. Plug the cable back in.

As we explain in How to test a MacBook battery it’s actually quite simple to check your MacBook battery to see if it needs replacing.

To check is whether there is a problem with your battery follow these steps:

1. Click on the battery charge icon at the top right of the desktop near the clock.
2. Click on Battery Settings. This will open the battery section of System Settings (you can also get here from System Settings > Battery).
3. Check what the advice besides Battery Health.

In our case battery health is normal, but in an older Mac we saw a warning that we should Service Battery (as shown above).

On older Macs you should follow these steps to check battery health:

1. Hold down the Alt/Option key.
2. Click the battery charge icon at the top right of the desktop near the clock.
3. After the Condition heading at the top of the menu you’ll see one of four battery status messages: Normal, Replace Soon, Replace Now, and Service Battery.

If your battery is described as Normal you should have nothing to worry about in terms of battery health. If it suggests Replace Soon, Replace Now or Service Battery then that may well be the cause of your battery charging issues.

If your battery needs replacing you should read Should you replace your MacBook battery or pay Apple to do it?

Sometimes a software update may fix your Mac charging problems.

For example, when Apple issued the macOS Monterey 12.2 update a bug was introduced that caused some Mac batteries to drain really quickly in sleep mode. The issue was found to be related to an issue with Bluetooth and a subsequent macOS 12.2.1 update addressed the battery drain problem.

Make sure that your Mac is running the most recent version of the macOS software. Go to System Settings > General > Sofware Update (or System Preferences > Software Update in older versions of macOS) to check that there isn’t an update.

If you are still having no luck getting to the bottom of your Mac charging issues, you could reset the battery. The process you follow to reset the battery in your MacBook Pro or MacBook Air will be determined by the age of your Mac, and whether it has an Intel chip or an Apple chip inside.

It is unlikely that your Mac has a removable battery as that hasn’t been the case since before 2012. However, if your Mac is old enough to have a removable battery you could remove the battery, disconnect the power adapter, hold down the power key for 10 seconds before replacing the battery and then plug the power adapter back in. The battery will reset when you restart the Mac. If your Mac is that old it’s probable that this process isn’t going to help this aging battery recover though.

For Macs that don’t have a removable battery, the process to reset the battery requires you to reset the SMC (System Management Controller). This is a chip on your Mac’s logic board that controls the power. 

Resetting the SMC can help with battery and power-related problems, however, the process for resetting SMC is different depending on the age of your Mac. 

These are the steps you need to follow if your Mac has an Intel processor.

1. Shut down the MacBook.
2. Connect the power adapter.
3. Hold down Control + Shift+ Option/Alt and the Power button for about four seconds. Then release all four together.
4. Press the Power button to start up the Mac again.

If you have an Apple silicon Mac – with an M1, M2 or M3-series chip inside you won’t be able to reset the SMC because there is no system management controller–all functions that were previously handled by the chip are now embedded in the processor. This doesn’t mean you are stuck and can’t reset things: all you need to do is turn your Mac off, wait about 30 seconds, and turn it on again.

If you’d like to find out more, read out full tutorial on resetting the SMC. Also see: How to fix a Mac.

If the above advice doesn’t help then you should take your MacBook to Apple (or an Apple reseller that is an Apple Authorized Service Provider) for servicing and maybe consider having the battery replaced.

You’ll need to find out whether your Mac qualifies to be serviced by Apple. It depends on whether the Mac is still under warranty or if you have AppleCare. Here’s how to check if you are covered:

1. Click here to go to Apple’s Service and Support website. 
2. Enter your serial number (you can find it by clicking on the Apple menu > About This Mac).
3. Prove you aren’t a robot.

You will be taken to a page that explains what cover you have. In our case it indicates that Consumer Law May Apply and suggests we talk to an advisor.

If you have Apple Cover, or your Mac is still within warranty then it is easy to set up a repair. Just go through the options here. We suggest Startup or Power > Charging tips or troubleshooting. You’ll see options to Talk to Apple support, schedule a call, start a chat session, or bring in for repair. 

We have this article about getting a Mac repaired. We also look at Mac DIY repair guide and how long Apple repairs take and how much they cost.